Building a home near Lake Granbury is exciting, and the electrical side is the part most owners understand least. When you search for an electrical contractor Granbury builders and homeowners can count on, you usually find a map listing with a phone number. What you rarely find is a plain explanation of what actually happens, in what order, and who you should call at each step. This guide fills that gap. It walks through how new construction electrical work runs in Granbury and Hood County, from plan review to the final walk-through.
Who We Are: A Veteran-Owned Electrical Contractor in Granbury, TX
Revamped Electric is a veteran-owned electrical company based at 5630 Barkridge Dr in Granbury, Texas. The company is owned by Austin Barrett and co-owned by Nick Torres, and the work is done by a small, Texas-licensed electrical team. You can see the Revamped Electric wrapped truck around Hood County, and the people who show up are the people you talked to on the phone.
Being a small team matters on a new build. You are not passed between a salesperson, a dispatcher, and a crew you have never met. Your questions about panel size, outlet placement, or scheduling go to the people responsible for the work. Licensing is also worth verifying for any contractor you hire. Electricians in Texas are licensed through the Texas Department of Licensing and Regulation (TDLR), and you can ask any contractor for their license information and look it up yourself. You can also read what neighbors have said on our reviews page.
New Build Electrical Services We Provide in Hood County
New home wiring in Granbury, TX is not one job. It is a series of connected scopes, and each one affects the next. Here is what a residential electrical contractor in Granbury typically handles on a new build, along with where to learn more about each piece.
Service Entrance and Service Panel Setup
Power enters the home through the service entrance and lands at the service panel, which is the heart of the electrical system. Sizing it correctly at the start is far cheaper than fixing it later. If you want to understand what a panel does and how upgrades work down the road, see our page on panel changes.
Rough-In Wiring and Circuits
Rough-in is the stage where wiring is run through the open framing before insulation and drywall go up. This is where circuits are planned and installed for kitchens, bedrooms, living areas, garages, and major appliances. Our circuit installation page explains how dedicated circuits are added and why they matter.
Outlets, Switches, and Lighting
Outlet and switch locations are set during rough-in, and the fixtures themselves go in later. Good planning here is the difference between a house that feels easy to live in and one where you are running extension cords in year one. See our pages on outlet installation and lighting installation for the details.
Trim-Out and Final Connections
Trim-out happens after drywall and paint. The crew installs devices, cover plates, fixtures, and the final connections at the panel. You can browse everything we offer on our services page.
The New Construction Electrical Timeline, Step by Step
Every build is different, and your builder controls the master schedule, so we will not promise fixed durations here. What stays consistent is the order of the stages.
- Plan and load review. We look at the floor plan, the size of the home, the major appliances, and any special equipment. This determines service size and how many circuits the home needs.
- Rough-in. Once the framing is up, wiring, boxes, and panel locations are installed before insulation.
- Rough-in inspection. The work is inspected while the walls are still open, so any corrections are simple to make.
- Trim-out. After drywall and paint, devices, fixtures, and the service panel are finished and labeled.
- Final inspection and power-up. The finished installation is inspected, and the home is ready to be energized once the process is complete.
The biggest timeline risk is not the wiring. It is a late decision. Changing a circuit after drywall is up costs time and money, which is why the next section matters so much.
Planning Decisions to Make Before Rough-In Starts
The best new build electrical projects are decided on paper first. Before the walls close, walk through how your family will really use each room.
- Kitchen circuits and appliances. Think about the range, microwave, dishwasher, disposal, refrigerator, and countertop outlets. Our guide on kitchen electrical requirements for your Granbury home goes deeper on this.
- Outlet placement. Consider furniture layouts, TV walls, nightstands, desks, and outdoor spaces such as patios and covered porches.
- Lighting layout. Decide where you want recessed lighting, pendants, under-cabinet lights, and dimmers before the fixtures are chosen.
- Future-proofing. If there is a chance you will want an EV charger or a backup generator someday, tell your electrician now. Planning panel space and conduit routes during construction is much easier than retrofitting later.
- Fixture and finish choices. Have them selected early so the trim-out goes smoothly.
Permits and Inspections for New Construction in Granbury and Hood County
Permit requirements can differ depending on whether your property sits inside the Granbury city limits or in unincorporated Hood County. That is one of the most common points of confusion for people building on acreage outside of town. Electrical work is also expected to meet the National Electrical Code (NEC) as adopted locally, and inspections are how that is verified.
We coordinate the electrical permit side with your builder so the right jurisdiction is involved and inspections are scheduled at the right moments. If you are not sure which rules apply to your lot, ask before you break ground. A quick conversation early on can prevent delays later.
What Drives the Cost of New Build Electrical Work
Every home is priced on its own plans, so be cautious about anyone quoting a flat number without seeing them. These are the factors that move the price:
- Square footage. More home generally means more wiring, more devices, and more labor.
- Service size. A larger service and panel cost more than a standard setup, but may be needed for bigger homes or heavy loads.
- Number of circuits. Dedicated circuits for appliances, workshops, pools, or EV charging add to the scope.
- Fixture and lighting choices. A home full of recessed lighting and specialty fixtures takes more labor than a basic layout.
- Site distance. A home set far back from the road or the utility connection requires more conductor and more work to reach.
The best way to get an accurate number is a plan review. Bring your drawings and your wish list, and we will tell you what is realistic.
Serving Granbury, Tolar, Cresson, Stephenville, and Weatherford
Our home base is Granbury, and we work across the surrounding communities.
- Granbury: From lake-area homes near Lake Granbury to subdivisions and custom builds close to the square, this is where we are closest to the job.
- Tolar: Many builds here are on larger lots, so the distance between the meter and the house is worth discussing early.
- Cresson: Cresson sits at the meeting point of several counties, so it is smart to confirm which jurisdiction applies to your property before permitting.
- Stephenville: As the Erath County seat, it is a longer trip from Granbury, so we plan trips around inspections and scheduled stages.
- Weatherford: As the Parker County seat, it has its own local permitting environment, which we confirm for each project.
How to Choose an Electrical Contractor in Granbury
Whether you pick us or someone else, use this checklist when comparing an electrical contractor Granbury builders recommend.
- Licensing. Ask for the license information and verify it through TDLR.
- Insurance. Ask for proof of liability coverage and, where applicable, workers' compensation.
- Communication with your builder. A good electrician works with the general contractor, not around them. Ask how schedules and changes are handled.
- Clear scope in writing. You should know what is included, what is not, and how changes are priced.
- Workmanship warranty. Ask what is covered and for how long, and get it in writing.
- Local reputation. Read recent reviews and look for details about communication and cleanup, not just star ratings.
New Build Electrical FAQ
Do I need a licensed electrician for a new home in Hood County?
Yes, you should plan on it. Electrical work in Texas is regulated through TDLR, and new construction wiring is inspected for NEC compliance. A licensed electrician helps ensure the work is done safely and passes inspection.
When should the electrician be involved in a new build?
As early as possible, ideally before framing is finished. Early plan and load review helps settle service size, circuit counts, and outlet and lighting locations before anything is hidden behind drywall.
Who pulls the electrical permit?
We coordinate the permit side with your builder so it fits the requirements of the jurisdiction your property is in. Confirm the arrangement up front so nothing falls through the cracks.
Do permit requirements differ inside Granbury and outside city limits?
They can. Requirements may differ between the city of Granbury and unincorporated Hood County, so it is important to confirm which applies to your lot at the start of the project.
Can I plan for an EV charger or generator in a new build?
Yes, and it is the best time to do it. Planning panel capacity and conduit routes during construction makes later additions much simpler.
How much will my new build electrical work cost?
It depends on square footage, service size, number of circuits, fixture choices, and site distance. A plan review is the most reliable way to get a real estimate.
Start Your New Build Electrical Plan Before Rough-In
The smoothest builds we see are the ones where the electrician is part of the conversation early. If you are building in Granbury, Tolar, Cresson, Stephenville, or Weatherford, reach out before rough-in begins and we will go through your plans with you. Austin Barrett, Nick Torres, and the Revamped Electric team, along with our wrapped truck, are ready to help you get the wiring right the first time.
Call 817-677-0036 or use our contact page to schedule a new build plan review with Revamped Electric.